BHXWJ - ID 7329T106,340 VOC GRAY
- MSDS: BHXWJ
- Manufacturer: DEXTER COATINGS
- Product Name: ID 7329T106,340 VOC GRAY
- National Stock Number: 8010-01-293-3795
Product Identification
Product ID:ID 7329T106,340 VOC GRAY
MSDS Date:04/03/1990
FSC:8010
NIIN:01-293-3795
Kit Part:Y
MSDS Number: BHXWJ
Responsible Party
HAYWARD, CA 94544
US
Emergency Phone: 415-791-1951
Info Phone: 415-791-1951
Preparer: S. MORRIS
Cage: 0HKK2
Contractor
Telephone: 415-791-1961
Cage: 0HKK2
Ingredients
2,4 PENTANEDIONE
CAS: 123-54-6
RTECS: SA1925000
Fraction By Weight: <10%
N-BUTYL ACETATE (SARA III)
CAS: 123-86-4
RTECS: AF7350000
Fraction By Weight: <10%
OSHA PEL 150 PPM/200 STEL
ACGIH TLV: 150 PPM/200STEL;9192
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA III)
CAS: 78-93-3
RTECS: EL6475000
Fraction By Weight: <10%
OSHA PEL 200 PPM/300 STEL
ACGIH TLV: 200 PPM/300STEL 9192
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
METHYL N-AMYL KETONE
CAS: 110-43-0
RTECS: MJ5075000
Fraction By Weight: <10%
OSHA PEL 100 PPM
ACGIH TLV: 50 PPM; 9192
1-METHOXY 2-PROPANOL ACETATE (VAPOR PRESSURE 3.8 MMHG @
CAS: 108-65-6
Fraction By Weight: <10%
ETHYL-3-ETHOXYPROPIONATE (VAPOR PRESSURE 1.11 MMHG @ 20C)
CAS: 763-69-9
RTECS: UF3325000
Fraction By Weight: <10%
VOC. 3.3 POUNDS PER GALLON LESS WATER.
RTECS: 9999999VO
Hazards
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: OVEREXPOSURE BY INHALATION MAY
CAUSE IRRITATION OF THE RESPIRATORY TRACT, HEADACHES, DIZZINESS OR
DROWSINESS. SKIN OR EYE CONTACT: IRRITANT TO THE EYES AND SKIN. MAY
AFFECT RESPIRATORY TRACT, L IVER, BLOOD AND CENTRAL NERVOUS SYSTEM.
Explanation of Carcinogenicity:NO
Effects of Overexposure:OVEREXPOSURE BY INHALATION MAY CAUSE IRRITATION
OF THE RESPIRATORY TRACT, HEADACHES, DIZZINESS OR DROWSINESS. SKIN
OR EYE CONTACT: IRRITANT TO THE EYES AND SKIN.
Medical Cond Aggravated by Exposure:UNKNOWN AT THIS TIME.
First Aid
First Aid:INHALATION: REMOVE FROM EXPOSURE. EYE CONTACT: FLUSH
IMMEDIATELY WITH LARGE AMOUNTS OF RUNNING WATER FOR AT LEAST 15
MINUTES. SKIN CONTACT: REMOVE CONTAMINATED CLOTHING AND WASH SKIN
WITH SOAP AND WAT ER. INGESTION: DRINK WATER. IF NECESSARY, CONSULT
A PHYSICIAN FOR ANY OF THESE CONDITIONS.
Fire Fighting
Flash Point Method:SCC
Flash Point:34 F/1 C
Lower Limits:1.05
Extinguishing Media:USE WATER FOG, FOAM, DRY CHEMICAL OR CARBON
DIOXIDE.
Accidental Release
Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION, AVOID
BREATHING VAPORS, VENTILATE AREA AND REMOVE WITH INERT ABSORBANT
AND NON-SPARKING TOOLS.
Handling
Handling and Storage Precautions:CONTAINERS SHOULD BE GROUNDED WHEN
POURING. AVOID FREE FALL OF LIQUID IN EXCESS OF A FEW INCHES. MAKE
SURE DRUM IS COMPLETELY EMPTY BEFORE WELDING,ETC
Other Precautions:DO NOT TAKE INTERNALLY. THE DRUM SHOULD BE
INDUSTRIALLY CLEANED PRIOR TO REUSE. DO NOT FLAME CUT, BRAZE OR
WELD WITHOUT A NIOSH APPROVED RESPIRATOR OR APPROPRIATE
VENTILATION.
Exposure Controls
Respiratory Protection:WHERE GENERAL DILUTION OR LOCAL EXHAUST FAILS TO
ADEQUATELY DILUTE THE TWA/PEL, USE:NIOSH/MSHA APPROVED AIR LINE
TYPE RESPIRATORS OR HOODS FOR ENCLOSED & CONFINED AREAS. AIR
PURIFYING RESPIRATORS MAY BE USED FOR OTHER AREAS.
Ventilation:GENERAL DILUTION OR LOCAL EXHAUST VENTILATION TO KEEP
TWA/LEL BELOW ACCEPTABLE LIMITS & TO REMOVE DECOMPOSITION PRODUCTS
Protective Gloves:CHEM RESISTANT FOR PROLONG/REPEATED CONT
Eye Protection:SAFETY EYEWARE TO PROTECT AGAINST SPLASH
Supplemental Safety and Health
KEEP CONTAINERS CLOSED WHEN NOT IN USE!
Chemical Properties
Boiling Pt:B.P. Text:172 TO 337F
Vapor Density:> THAN AIR
Stability
Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:FUMES MAY CONTAIN CARBON MONOXIDE &
OXIDES OF NITROGEN. MAY PRODUCE HAZARDOUS FUMES WHEN HEATED TO
DECOMP, AS IN WELDING
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS. BEFORE ATTEMPTING TO CLEAN UP, SEE
INGREDIENTS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.